Habasit PQ-02, Use And Maintenance Manual

Page: 27 / 34

Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
CQ-02
Author: FT Page 7 of 14
Edition: 04/2018 R. 0
Replaces:
6 Welding of round belts

Cut the thermoplastic round belt ends perpendicular
to the axis using the S-16 tool (see accessories
available). Refer to the Habasit Guide to determine
the correct development of the round belt.

Open the bars [1] unscrewing the tensioning knob.

Open the screw clamps [2] by unscrewing the knobs
[8].

Introduce belt ends laterally into V guides [1] and
lock them into place by protruding the ends about 5
mm / 0,2 in., in accordance with the diameter (if
larger must protrude a little more).
INDICATION
Fix belt without twisting, i.e. according to its “inner disposition”!

Insert the hot plate of the welder in the space
between belt ends locked on the V-guides [1].

Tighten the rods by pressing the belt faces against
those of the hot plate.
~ 5 mm