Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
W-01
Author:
FT
Page 9 of 15
Edition:
06/2017
R. 0
Replaces:
5 Getting started
Make sure the voltage specified on the specifications plate corresponds to connected mains voltage.
A tool marked 230 V can also be connected to the 220 V mains.
Similarly, for the 120 V version, 110 V power is tolerated.
Make sure the heating plate [1] is clean.
Connect the welder W-01 to mains and place it on the support or on a sufficiently flat surface. Respect
preheating time of 10 min.
Check temperature of the heating plate. The temperature is preset at the factory at 270 °C / 519 °F.
WARNING
Do not touch the hot zone of the welding tool!
Keep device away from water and meltable substances.
Make sure the heating plate do not touch surfaces or objects when the welder is placed on the support or on
the workbench.
Do not suspend the welder W-01 from its cable with the heating plate swinging. The
heat rising from the heating plate [1] may damage the welder W-01.
During pauses in work, place the welder, if it is still connected to the mains, on the
supplied support or on a level surface
Summary of Contents for PQ-02
Page 20: ......
