![background image](http://html.mh-extra.com/html/haan/multiforce-plus-ss-22/multiforce-plus-ss-22_instruction-manual_575843013.webp)
11
11
When unit has cooled, remove
pads or scrub brushes. Store
unit upright in a dry area.
10
Place unit with pads/scrub
brushes attached onto Floor
Protector / Resting Mat. Allow
to cool down for five (5) min.
iMPOrTanT:
Vibration Sound
During use it’s normal to
hear a “clicking” sound
coming from the unit. This
sound is produced by
the water being pumped
through the unit.
Cleaning pads and Scrub Brush Attachments
iMPOrTanT
iMPOrTanT
Always empty the water tank
once you have finished using
the Multiforce Plus™.
When removing the pads or scrub brushes from the unit DO
NOT turn unit upright or on its side. ALWAYS lift unit UP off
the pads or scrub brushes.
Floor setting indicator Light
Floor setting Button
Use this button to switch between two
steam levels, normal & turbo. Each caters
to specific floor types.
This light indicates which steam floor setting
level is selected.
Gentle steam emis-
sion perfect for sealed
hardwood, laminate,
bamboo and other
delicate floors.
High steam emission
ideal for ceramic,
stone, tile and other
durable floors.
STEAM
NORMAL
TURBO
Floor Setting
Control
Floor Setting
Indicator Light
red
Light
Green
Light
=
=
Buffing Pads
Ultra-Microfiber Cleaning Pads
scrub Brush attachments
Ideal when using CR-motion
™
without steam. Can be used
with a floor agent to polish and shine. See page 8 for care
instructions.
Note:
It may be helpful to apply the floor agent with the Ultra-Microfiber Cleaning Pads and finish with the Buffing Pads
Ideal when using the steam function by itself or with CR-
motion™ activated. Great for cleaning laminate, hardwood,
tile and vinyl surfaces. Can also be used to “blot” fresh
stains on carpet. See page 8 for care instructions.
Ideal when using CR-motion™ with or without steam. Great
for outdoor use on decks, patios and walkways. Best when
used with a cleaning agent. To clean Scrub Brush
Attachments rinse with water.
PUSH
PUSH
PUSH
Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with
wax or some no-wax floors, the sheen may be removed by heat and steam. It is always recommended
to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you
check the use and care instructions from the floor manufacturer.