![background image](http://html.mh-extra.com/html/haan/multiforce-plus-ss-22/multiforce-plus-ss-22_instruction-manual_575843012.webp)
10
1
4
7
Assemble unit and place on
Floor Protector / Resting Mat.
Tighten cap. Insert tank (cap
down) until it “clicks”.
Tilt handle at a 45º angle.
Push and pull slowly across
the floor to clean thoroughly.
STEAM
NORMAL
TURBO
2
5
8
Press Water Tank Release but-
ton and remove water tank.
PA
D
OF
F
to ACtIVAte Cr-motion:
Using foot press ON/OFF button.
STEAM
3
6
9
Turn Cap counterclockwise to
remove. Fill tank with water.
Line up pads or scrub
brushes. Gently place unit on
pads or scrub brushes. You
are now ready to steam, buff
or scrub.
When done, push CR-motion
ON/OFF Button and Steam
ON/OFF Button.
operating Instructions Continued on Next page
PA
D
OF
F
The Multiforce Plus™ offers a number of cleaning options:
1.
Steam can be used without CR-motion
™
.
2.
CR-motion
™
can be used without steam.
3.
Steam and CR-motion™ can be used simultaneously.
to SteAm:
Press ON/OFF
button. Wait 40-45 seconds for
unit to heat up. Unit may vibrate
while heating.
using the multiforce plus™ - operating Instructions