![background image](http://html.mh-extra.com/html/haan/multiforce-plus-ss-22/multiforce-plus-ss-22_instruction-manual_575843006.webp)
4
operating Instructions
Do not immerse the
multiforce plus™ in
water or any other
liquid.
1.
The easiest way to use the machine is to tilt the handle to a 45º angle and
clean slowly 2-3 yards at a time.
2.
Hand wash or machine wash the ultra-microfiber pads in the delicate cycle
with a mild detergent.
3.
We recommend air drying the ultra-microfiber pads for 24 hours, but they
could be dried in a dryer on a low heat setting.
4.
A good amount of steam passes through the ultra-microfiber pads. We
recommend that the ultra-microfiber pads be changed when it
becomes oversaturated.
5.
To remove stubborn stains from vinyl or linoleum floors, pre-treat with a mild
detergent and some water before using the floor sanitizer.
Always operate the
multiforce plus™ by
gripping the handle.
Do not grip by the
pole.
Care & Maintenance
1.
Turn the Multiforce Plus™ off and unplug from
the electrical outlet.
2.
Wrap power cord around cord hangers.
3.
Let the Multiforce Plus™ cool for
five (5) minutes
before removing the ultra-microfiber pads and
before emptying the water tank.
4.
Always empty the water tank when you have
finished using the Multiforce Plus™.
5.
Never leave ultra-microfiber pads on the
Multiforce Plus™ when you have finished using
it. Always remove the ultra-microfiber pads and
wash in warm water with a mild detergent.
Never use bleach or fabric softener when
cleaning the ultra-microfiber pads.
The ultra-microfiber pads can be washed in a
washing machine and dried in a clothes
dryer but on low heat.
To decrease pad wear, we recommend the
pads be hung to dry for 24 hours.
6.
Wipe the Multiforce Plus™ with a damp cloth to
clean. Never immerse the Multiforce Plus™ in
water or any other liquid.
7.
In order to keep the Multiforce Plus™ in good
condition, we recommend that you clean the
water tank once a month to eliminate calcium
deposits. Add eight ounces (8 oz) of water to
the water tank and insert 1 packet of Fresh
Rinse™ Lime and Scale Remover. Shake to
loosen any deposits. Place unit on resting
mat without pads, turn unit on and allow water
to steam until water in tank is depleted.
Do
not use vinegar or other decalcifying
substances in the floor sanitizer
water tank.
iMPOrTanT
Always ensure that the
multiforce plus™ is
UN-
PLUGGED
from the wall
receptacle prior to clean-
ing or emptying the water
tank.
CaUTiOn
CaUTiOn
ImportANt: Never leave the multiforce plus™ steaming in one spot on any surface for any period of
time.Always place on the floor protector pad and make sure that the floor sanitizer is turned off.
SAVe tHeSe
INStruCtIoNS | for
HouSeHoLD uSe
Commercial use of this unit
voids the manufacturer’s
warranty.
Helpful Hints