12
Item Specification
Output
+12 V
at 1 A
Figure 11
Connecting the AP to the local power supply
(1) Power port
(2) AC/DC adapter
(3) Power source
After you connect the AP to the power supply, verify the AP operation by examining the LEDs on the AP.
For more information about the LEDs, see "Appendix LEDs and ports."
Connecting the AP to the network
For Internet or MAN access, connect the Ethernet port on the AP to an Ethernet port on an Ethernet switch,
and then verify that the AP has been connected to the network.
When the AP operates as a fit AP, execute the
display wlan ap all
command on the AC that connects to
the fit AP. If the AP status is
R/M
, the AP is connected to the network.
<AC> display wlan ap all
Total Number of APs configured : 1
Total Number of configured APs connected : 1
Total Number of auto APs connected : 0
AP Profiles
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, R = Run, KU = KeyUpdate, KC = KeyCfm
--------------------------------------------------------
AP Name State Model Serial-ID
--------------------------------------------------------
ap1 R/M WA4320-ACN-PI 219801A0T59157G00010
--------------------------------------------------------
When the AP operates as a fit AP, execute the
ping
command on the fat AP to ping the uplink network
device. If the ping operation succeeds, the AP is connected to the network successfully.
