9
Figure 7
Attaching the T6 security Torx screw to the AP
Mounting the AP on a ceiling
IMPORTANT:
The ceiling for installing the AP must be less than 18 mm (0.71 in) in thickness, and can bear a load of
5 kg (11.02 lb). H3C recommends that you reinforce the ceiling by using boards if the ceiling is not
strong enough.
To install the AP on a ceiling:
1.
Mark two installation points on the ceiling, as shown in
2.
Drill holes with a diameter of 5.0 mm (0.20 in) at the marked points, as shown in
.
