6
Installing the AP
You can only install the AP indoors.
Mounting the AP on a wall
1.
Mark two installation points on the wall, as shown in
. Drill holes at the marked points on
the wall.
Figure 4
Marking two installation points on the wall
2.
Attach the wall anchor kit to the wall:
a.
Insert an expansion anchor into each hole, and use a rubber hammer to tap the expansion
anchor until the anchor is all flush with the wall surface.
b.
Fasten the screw into each expansion anchor. Do not fasten the screw all the way into the
anchor and leave 2.5 mm (0.10 in) to 4.5 mm (0.18 in) of the screw exposed.
