manualshive.com logo in svg

H3C WA2620X-AGNP, Web-Based Configuration Manual, Page: 50 / 447

Share
Download
H3C WA2620X-AGNP Web-Based Configuration Manual Download Page 50

 

37 

Device maintenance configuration 

Software upgrade 

A boot file, also known as the system software or device software, is an application file used to boot the 

device. Software upgrade allows you to obtain a target application file from the local host and set the file 
as the boot file to be used at the next reboot. In addition, you can select whether to reboot the device to 

bring the upgrade software into effect. 

 

 

CAUTION: 

•

 

A software upgrade takes some time. Avoid performing any operation on the web interface during the
upgrading procedure. Otherwise, the upgrade operation may be interrupted. 

•

 

The device changes the original file name to another one (extension name not changed) after you get 
the target application file from the local host. 

 

1.

 

Select 

Device

 > 

Device Maintenance

 from the navigation tree. 

The software upgrade configuration page appears. 

Figure 35

 

Software upgrade configuration page 

 

 

2.

 

Configure the software upgrade parameters as described in 

Table 23

. 

3.

 

Click 

Apply

. 

Table 23

 

Configuration items 

Item Description 

File

 

Specify the path of the local application file, which must be with an extension .app 
or .bin.

 

Summary of Contents for WA2620X-AGNP
































































































































































































































































































































































































































































Reviews:

No comments