manualshive.com logo in svg

H3C WA2620X-AGNP, Web-Based Configuration Manual, Page: 202 / 447

Share
Download
H3C WA2620X-AGNP Web-Based Configuration Manual Download Page 202

 

189 

•

 

Monitor mode 

As shown in 

Figure 183

, when AP 2 operates in monitor mode, it monitors all devices in the WLAN 

through scanning 802.11 frames and records scan results, but it does not provide WLAN services. For the 

channel detection results, see "

Displaying detection record

." 

Figure 183

 

Monitor mode 

 

 

•

 

Hybrid mode 

When an AP operates in hybrid mode, it can both scan devices in the WLAN and act as an wireless 

access point, as shown in 

Figure 184

. 

Figure 184

 

Hybrid mode 

 

 

 

NOTE: 

When an AP operates in monitor or hybrid mode, it monitors the WLAN. The administrator can monitor
the WLAN by checking the monitoring records so as to adjust the WLAN settings when the interference is

serious. 

 

Configuring the AP operating mode 

1.

 

Select 

Radio

 > 

Channel

 

Scan 

from the navigation tree. 

2.

 

Click the 

AP Monitor

 tab. 

Summary of Contents for WA2620X-AGNP
































































































































































































































































































































































































































































Reviews:

No comments