manualshive.com logo in svg

H3C WA2620X-AGNP, Web-Based Configuration Manual, Page: 190 / 447

Share
Download
H3C WA2620X-AGNP Web-Based Configuration Manual Download Page 190

 

177 

4.

 

Expand 

Advanced Setup

. 

Figure 176

 

Radio setup (advanced setup) 

 

 

5.

 

Configure the radio as described in 

Table 68

. 

6.

 

Click 

Apply

. 

Table 68

 

Configuration items 

Item Description 

Preamble 

Preamble is a pattern of bits at the beginning of a frame so that the receiver 
can sync up and be ready for the real data. There are two different kinds of 

preambles: 

•

 

Short preamble. A short preamble improves network performance. 

Therefore, this option is always selected. 

•

 

Long preamble. A long preamble ensures compatibility between access 

point and some legacy client devices. Therefore, you can select this option 

to make legacy client devices support short preamble. 

802.11a/802.11n (5 GHz) does not support this configuration. 

Transmit Distance 

Maximum transmission distance. 

Summary of Contents for WA2620X-AGNP
































































































































































































































































































































































































































































Reviews:

No comments