manualshive.com logo in svg

H3C WA2620X-AGNP, Web-Based Configuration Manual, Page: 109 / 447

Share
Download
H3C WA2620X-AGNP Web-Based Configuration Manual Download Page 109

 

96 

Figure 94

 

Modify a VLAN 

 

 

3.

 

Configure the description and port members for the VLAN as described in 

Table 46

. 

4.

 

Click 

Apply

. 

Table 46

 

Configuration items 

Item

 

Description

 

ID

 

Display the ID of the VLAN to be modified.

 

Description

 

Set the description string of the VLAN. 
By default, the description string of a VLAN is its VLAN ID, such as 

VLAN 0001

. 

 

Port

 

Untagged 
Member. 

Find the port to be modified and select the 

Untagged Member

, 

Tagged Member

, or 

Not a Member

 option for the port: 

•

 

Untagged

: Indicates that the port sends the traffic of the VLAN with the VLAN tag 

removed.  

•

 

Tagged

: Indicates that the port sends the traffic of the VLAN without removing the 

VLAN tag.  

•

 

Not a Member

: Removes the port from the VLAN.  

 IMPORTANT: 

When you configure an access port as a tagged member of a VLAN, the link type of the 
port is automatically changed into hybrid. 

Tagged 
Member. 

Not a 
Member. 

 

Modifying a port 

1.

 

Select 

Network

 > 

VLAN

 from the navigation tree 

2.

 

Click the 

Port

 tab to enter the page as shown in 

Figure 95

.  

Figure 95

 

Port configuration page 

 

 

Summary of Contents for WA2620X-AGNP
































































































































































































































































































































































































































































Reviews:

No comments