45
Views
Voice operation view
Default command level
2: System level
Parameters
item-number
: Specifies a reaction entry ID in the range of 1 to 10.
threshold-value
: Specifies threshold values.
upper-threshold
: Specifies the upper threshold in the range of 1 to 100.
lower-threshold
: Specifies the lower threshold in the range of 1 to 100. It must not be greater than the
upper threshold.
action-type
: Specifies what action to be triggered and it defaults to
none
.
none
: Specifies the action of only displaying results on the terminal display.
trap-only
: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the network management system (NMS).
Examples
# Create reaction entry 1 for monitoring the ICPIF value in the voice operation. Set the upper threshold
to 50 and lower threshold to 5. Before the voice operation starts, the initial state of the reaction entry is
invalid. After the operation, the ICPIF value is checked. If it exceeds the upper threshold, the state of the
reaction entry is set to over-threshold. If it is below the lower threshold, the state is set to below-threshold.
Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] reaction 1 checked-element icpif threshold-value 50 5
action-type trap-only
reaction checked-element { jitter-ds | jitter-sd }
Use
reaction checked-element
{
jitter-ds
|
jitter-sd
} to configure a reaction entry for monitoring one-way
jitter in the NQA operation. You cannot edit a reaction entry. To change the attributes in a reaction entry,
use
undo reaction
to delete the entry first and then configure a new one.
Use
undo reaction
to delete the specified reaction entry.
Syntax
reaction
item-number
checked-element
{
jitter-ds
|
jitter-sd
}
threshold-type
{
accumulate
accumulate-occurrences
|
average
}
threshold-value
upper-threshold lower-threshold
[
action-type
{
none
|
trap-only
} ]
undo reaction
item-number
Default
No reaction entry for monitoring one-way jitter is configured.
Views
UDP jitter operation view, voice operation view
Summary of Contents for SR6600 SPE-FWM
Page 8: ...vi Index 254 ...
