224
Default command level
2: System level
Usage guidelines
If system information is output before you input information at a command line prompt, the system does
not display the command line prompt after the system information output.
If system information is output when you are inputting some interactive information (non Y/N
confirmation information), the system displays your input in a new line after the system information
output.
Examples
# Enable synchronous information output, and then issue the
display current-configuration
command to
view the current configuration of the device.
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] display current-
At this time, the system receives log information. It displays the log information first, and then displays
your previous input, which is
display current-
in this example.
%Apr 29 08:12:44:71 2007 Sysname IFNET/4/LINK UPDOWN:
GigabitEthernet2/0/1: link status is UP
Enter
configuration
to complete the
display current-configuration
command, and press the
Enter
key to
execute the command.
# Enable synchronous information output, and then save the current configuration (enter interactive
information).
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the log information. It displays the log information first and then displays
[Y/N].
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]:
Enter
Y
or
N
to complete your input.
info-center syslog channel
Use
info-center syslog channel
to configure the Web output channel. The system uses this channel to
output information to the Web interface.
Use
undo info-center syslog channel
to restore the default.
Syntax
info-center syslog channel
{
channel
-
number
|
channel
-
name
}
undo info-center syslog channel
Summary of Contents for SR6600 SPE-FWM
Page 8: ...vi Index 254 ...
