H3C SR6600 SPE-FWM Command Reference Manual Download Page 100

Page: 100 / 265

Field Description

Sent-fragments

Number of fragments sent.

Sent-packets

Number of packets sent.
Whether a packet is fragmented depends on the
interface MTU and the packet size in bytes. If the

packet size is larger than the MTU, the packet is
fragmented. If the packet size is smaller than or equal

to the MTU, the packet is sent.

Received-fragments Number

fragments successfully received.

Received-packets

Number of packets successfully received.
If fragments are received on an interface, the system

reassembles the fragments and sends a complete
packet to the upper layer software.

display ipc performance

Use

display ipc performance

to display IPC performance statistics.

Syntax

display ipc performance

{

node

node-id

self-node

} [

channel

channel-id

] [

{

begin

exclude

include

}

regular-expression

]

Views

Any view

Default command level

1: Monitor level

Parameters

node

node-id

: Displays the IPC performance statistics for the node specified by the

node-id

argument.

The following matrix shows the value ranges for the

node-id

argument:

SR6602 SR6602-X

SR6604/SR6608/SR6616 SR6604-X/SR6608-X/SR6

616-X

0 to 1

0 to 2

•

0 to 3 for SR6604

•

0 to 5 for SR6608

•

0 to 9 for SR6616

•

0 to 13 for SR6604-X

•

0 to 15 for SR6608-X

•

0 to 19 for SR6616-X

self-node

: Displays the IPC performance statistics for the local node.

channel

channel-id

: Displays the IPC performance statistics for the channel specified by the

channel-id

argument.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

Summary of Contents for SR6600 SPE-FWM










































































































































































































































































Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Brands by name

Popular brands

H3C SR6600 SPE-FWM, Command Reference Manual

Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Brands by name

Popular brands