H3C SecPath F1000-AI-X0 Installation Manual Download Page 35

Page: 35 / 73

3-27

Known-answer test for SHA1 passed.

Known-answer test for SHA224 passed.

Known-answer test for SHA256 passed.

Known-answer test for SHA384 passed.

Known-answer test for SHA512 passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for HMAC-SHA224 passed.

Known-answer test for HMAC-SHA256 passed.

Known-answer test for HMAC-SHA384 passed.

Known-answer test for HMAC-SHA512 passed.

Known-answer test for AES passed.

Known-answer test for RSA(signature/verification) passed.

Known-answer test for RSA(encrypt/decrypt) passed.

Known-answer test for DSA(signature/verification) passed.

Known-answer test for random number generator passed.

Known-Answer tests in the user space passed.

Starting Known-Answer tests in the kernel.

Known-answer test for SHA1 passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for AES passed.

Known-answer test for random number generator passed.

Known-Answer tests in the kernel passed.

Starting Known-Answer tests in the engine.

Known-answer test for SHA1 passed.

Known-answer test for HMAC-SHA1 passed.

Known-answer test for AES passed.

Known-answer test for RSA(signature/verification) passed.

Known-answer test for RSA(encrypt/decrypt) passed.

Known-answer test for DSA(signature/verification) passed.

Known-answer test for random number generator passed.

Known-Answer tests in the engine passed.

Cryptographic Algorithms Known-Answer Tests passed.

Line con0 is available.

Press ENTER to get started..

Press

Enter

to access user view of the firewall.

NOTE:

To access the EXTENDED-BOOTWARE menu, press

Ctrl

within four seconds at the

prompt "Press Ctrl+B to access EXTENDED-BOOTWARE MENU." If you do not press

Ctrl

at the prompt, the system starts to read and decompress program files. To enter the

EXTENDED-BOOT menu afterwards, you need to reboot the device.

Logging in to the firewall

You can use the following methods to access and manage the firewall. For more information about
logging in to the firewall, see the configuration guides and command references for the firewall.

Summary of Contents for SecPath F1000-AI-X0










































































Search results

Summary of Contents for SecPath F1000-AI-X0

Reviews:

Related manuals for SecPath F1000-AI-X0

Brands by name

Popular brands

H3C SecPath F1000-AI-X0, Installation Manual

Search results

Summary of Contents for SecPath F1000-AI-X0

Reviews:

Related manuals for SecPath F1000-AI-X0

Brands by name

Popular brands