20
Connecting an AC power cord
Connecting an AC power cord for an F100-C-G3, F100-S-G3, F100-M-G3, F100-A-G3, or
F100-E-G3 firewall
1.
Connect the connector of the AC power cord to the target AC power receptacle on the rear
panel of the chassis. Then use a power cord retainer clip (see
) or a cable tie (see
) to secure the power cord.
2.
Connect the other end of the power cord to an AC power source.
Figure2-19 Connecting an AC power cord (using a power cord retainer clip to secure the
power cord)
Figure2-20 Connecting an AC power cord (using a cable tie to secure the power cord)
Connecting an AC power cord for an F1000-C-G3, F1000-S-G3, F1000-A-G3, or F1000-E-G3
firewall
1.
Connect the female connector of the AC power cord to the AC power receptacle on the rear
panel of the chassis. Then use a power cord retainer clip (see
) or a cable tie (see
) to secure the power cord.
2.
Connect the other end of the power cord to an AC power source.
1
2
1
2
Summary of Contents for SecPath F100-X-G3
Page 63: ...i Contents 1 Appendix B LEDs 1...
