117
View
Scheduler policy view
Default level
2: System level
Parameters
fg-name
: Specifies a forwarding group name, which is a case-sensitive string of 1 to 31 characters.
fp-name
: Specifies a forwarding profile name, which is a case-sensitive string of 1 to 31 characters.
Description
Use the
forwarding-group profile
command to nest a forwarding group in a scheduler policy and
specify a forwarding profile for this forwarding group.
Use the
undo forwarding-group
command to remove the specified forwarding group from the scheduler
policy.
The forwarding group and the forwarding profile must already exist.
A scheduler policy nests up to nine layer-1 forwarding groups.
You cannot remove any forwarding group from a scheduler policy that has been applied to a port.
Examples
# Nest forwarding group
subfg
in scheduler policy
testsp
and specify forwarding profile
testfp
for this
forwarding group.
<Sysname> system-view
[Sysname] qos scheduler-policy testsp
[Sysname-hqos-sp-testsp] forwarding-group testfg profile testfp
gts cir
Syntax
gts cir
cir-value
[
cbs
cbs-value
]
undo gts
View
Forwarding profile view
Default level
2: System level
Parameters
cir-value
: Specifies a committed information rate (CIR) in kbps, which ranges from 8 to 10000000 and
must be a multiple of 8.
cbs
cbs-value
: Specifies the committed burst size (CBS) in bytes, which ranges from 4096 to 16777216.
Description
Use the
gts
command to set GTS parameters in a forwarding profile.
Use the
undo gts
command to restore the default.
By default, no GTS parameters are set in a forwarding profile, and the traffic rate is not limited.
