H3C s5820x series, Acl And Qos Command Reference

Page: 103 / 136

92
Field Description
gmin
Lower threshold configured for green packets, whose drop precedence is
0
gmax
Upper threshold configured for green packets, whose drop precedence is
0
gprob
Drop probability slope configured for green packets, whose drop
precedence is 0
ymin
Lower threshold configured for yellow packets, whose drop precedence is
1
ymax
Upper threshold configured for yellow packets, whose drop precedence
is 1
yprob
Drop probability slope configured for yellow packets, whose drop
precedence is 1
rmin Lower threshold configured for red packets, whose drop precedence is 2
rmax Upper threshold configured for red packets, whose drop precedence is 2
rprob
Drop probability slope configured for red packets, whose drop
precedence is 2
qos wred apply
Syntax
qos wred apply table-name
undo qos wred apply
View
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default level
2: System level
Parameters
table-name : Name of a global WRED table.
Description
Use the qos wred apply command to apply a global WRED table on a port/port group.
Use the undo qos wred apply command to restore the default.
By default, no WRED table is applied on any port/port group.
In interface view, the setting takes effect on the current port only. In port group view, the setting takes
effect on all the ports in the port group.
Related commands:
display qos wred interface .
Examples
# Apply the queue-based WRED table queue-table1 to the port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1