74
Default level
1: Monitor level
Parameters
interface-type interface-number
: Specifies an interface by its type and number.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the
display qos trust interface
command to display priority trust mode and port priority information
on an interface.
If no interface is specified, the command displays priority trust mode and port priority information for all
interfaces.
Examples
# Display the priority trust mode and port priority settings of GigabitEthernet 1/0/1.
<Sysname> display qos trust interface GigabitEthernet 1/0/1
Interface: GigabitEthernet1/0/1
Port priority information
Port priority :0
Port priority trust type : dscp
Table 26
Output description
Field
Description
Interface
Interface type and interface number.
Port priority
The port priority set for the interface.
Port priority trust type
Priority trust mode on the interface, which can be:
•
dscp
—Uses the DSCP precedence of incoming packets for priority
mapping.
•
dot1p
—Uses the 802.1p priority of incoming packets for priority
mapping.
•
untrust
—Uses the port priority for priority mapping.
qos trust
Syntax
qos trust
{
dot1p
|
dscp
}
undo qos trust
View
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
