H3C s5820x series Acl And Qos Command Reference Download Page 73

Page: 73 / 136

Parameters

name

policy-name

: Displays information about the VLAN QoS policy specified by its name, a string of

1 to 31 characters.

vlan

vlan-id

: Displays information about the QoS policy or policies applied to the VLAN specified by its

ID.

inbound

: Displays information about the QoS policy applied to the inbound direction of the specified

VLAN.

outbound

: Displays information about the QoS policy applied to the outbound direction of the specified

VLAN.

slot

slot-number

: Displays the VLAN QoS policy information of the specified device in the IRF virtual

device. The range for the

slot-number

argument depends on the number of devices and the numbering of

the devices in the IRF virtual device.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see the

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the

display qos vlan-policy

command to display VLAN QoS policy information.

If no direction is specified, this command displays the VLAN QoS policy information in both the inbound

and outbound directions.
If no slot number is specified, this command displays all the VLAN QoS policy information of the IRF
virtual device.

Examples

# Display information about QoS policy

test

on the device numbered 6 in the IRF virtual device.

<Sysname> display qos vlan-policy name test slot 6

Policy test

Vlan 200: inbound

Vlan 300: outbound

Table 23

Output description

Field

Description

Policy

Name of the QoS policy

Vlan

ID of the VLAN where the VLAN policy is applied

inbound

The QoS policy is applied in the inbound direction of the VLAN.

outbound

The QoS policy is applied in the outbound direction of the VLAN.

# Display information about the QoS policy applied to VLAN 2.

<Sysname> display qos vlan-policy vlan 2

Vlan 2

Summary of Contents for s5820x series









































































































































Search results

Summary of Contents for s5820x series

Reviews:

Related manuals for s5820x series

Brands by name

Popular brands

H3C s5820x series, Acl And Qos Command Reference

Search results

Summary of Contents for s5820x series

Reviews:

Related manuals for s5820x series

Brands by name

Popular brands