manualshive.com logo in svg

H3C s5820x series, High Availability Configuration Manual, Page: 125 / 233

Share
Download
H3C s5820x series High Availability Configuration Manual Download Page 125

 

113 

# Create VLANs 1 through 30. 

<DeviceA> system-view 

[DeviceA] vlan 1 to 30 

# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports, assign them to VLANs 
1 through 30, and enable flush message receiving on them.  

[DeviceA] interface gigabitethernet 1/0/1 

[DeviceA-GigabitEthernet1/0/1] port link-type trunk 

[DeviceA-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 

[DeviceA-GigabitEthernet1/0/1] smart-link flush enable 

[DeviceA-GigabitEthernet1/0/1] quit 

[DeviceA] interface gigabitethernet 1/0/2 

[DeviceA-GigabitEthernet1/0/2] port link-type trunk 

[DeviceA-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 

[DeviceA-GigabitEthernet1/0/2] smart-link flush enable 

[DeviceA-GigabitEthernet1/0/2] quit 

3.

 

Configuration on Device B 

# Create VLANs 1 through 30. 

<DeviceB> system-view 

[DeviceB] vlan 1 to 30 

# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports, assign them to VLANs 

1 through 30, and enable flush message receiving on them. 

[DeviceB] interface gigabitethernet 1/0/1 

[DeviceB-GigabitEthernet1/0/1] port link-type trunk 

[DeviceB-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 

[DeviceB-GigabitEthernet1/0/1] smart-link flush enable 

[DeviceB-GigabitEthernet1/0/1] quit 

[DeviceB] interface gigabitethernet 1/0/2 

[DeviceB-GigabitEthernet1/0/2] port link-type trunk 

[DeviceB-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 

[DeviceB-GigabitEthernet1/0/2] smart-link flush enable 

[DeviceB-GigabitEthernet1/0/2] quit 

# Create monitor link group 1, and then configure GigabitEthernet 1/0/1 as an uplink port and 
GigabitEthernet 1/0/2 as a downlink port for monitor link group 1.  

[DeviceB] monitor-link group 1 

[DeviceB-mtlk-group1] port gigabitethernet 1/0/1 uplink 

[DeviceB-mtlk-group1] port gigabitethernet 1/0/2 downlink 

[DeviceB-mtlk-group1] quit 

4.

 

Configuration on Device D 

# Create VLANs 1 through 30. 

<DeviceD> system-view 

[DeviceD] vlan 1 to 30 

# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports, assign them to VLANs 

1 through 30, and enable flush message receiving on them. 

[DeviceD] interface gigabitethernet 1/0/1 

[DeviceD-GigabitEthernet1/0/1] port link-type trunk 

[DeviceD-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 

Summary of Contents for s5820x series










































































































































































































































Reviews:

No comments