70
NOTE:
USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee the
correct operation of USB devices from all vendors on the switch. If a USB device fails to operate on
the switch, replace it with one from another vendor.
10/100/1000BASE-T autosensing Ethernet port
Table 15 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type
RJ-45
Interface attributes
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X,
auto-sensing
Max transmission distance
100 m (328.08 ft)
Transmission medium
Category-5 (or above) twisted pair cable
Standards
IEEE 802.3i, 802.3u, 802.3ab
1/10BASE-T autosensing Ethernet port
The LSWM2XGT2PM interface card provides 1/10BASE-T autosensing Ethernet ports.
Table 16 1/10BASE-T autosensing Ethernet port specifications
Item Specification
Connector type
RJ-45
Interface attributes
1/10 Gbps, full duplex, MDI/MDI-X auto-sensing
Max transmission distance
•
Category-6 UTP
—55 m (180.45 ft)
•
Category-6 STP
—100 m (328.09 ft)
•
Category-6 SFTP
—100 m (328.09 ft)
•
Category-6 and above twisted pair
—100 m (328.09 ft)
Transmission medium
Category-6 (or above) twisted pair cable
Standards
IEEE 802.3an, 802.3ab
100/1000Base-X SFP port
The S5130-30F-HI switch provides 24 fixed SFP ports. The S5130-34C-HI switch provides eight
fixed SFP ports. You can install the 100 Mbps SFP modules in
and the 1000 Mbps SFP
transceiver modules in
in the SFP ports.
