78
Port mode LED (Mode)
status
Port LED status
Description
member ID of the switch is 5.
100/1000Base-X SFP port LED
On the S5130-30F-HI and S5130-34C-HI switches, the SFP port LED and the port mode LED work
in conjunction to indicate the operating status of the SFP port.
Table 28 100/1000Base-X SFP port LED description
Port mode LED
(Mode) status
SFP port LED status
Description
Steady green (rate
mode)
Steady green
The port is operating at 1000 Mbps and a link is present
on the port.
Flashing green
The port is sending and receiving data at 1000 Mbps.
Steady yellow
The port is operating at 100 Mbps and a link is present
on the port.
Flashing yellow
The port is sending or receiving data at 100 Mbps.
Flashing yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port.
Flashing yellow (IRF
mode)
S5130-30F-HI: Steady
green
S5130-34C-HI: Off
The SFP port LEDs on the switch work in conjunction to
indicate the IRF member ID of the switch. For example,
if the LEDs for ports 1 to 5 are steady green and the
other port LEDs are off, the IRF member ID of the
switch is 5.
SFP+ port LED
Table 29 SFP+ port LED description
SFP+ port LED status
Description
Steady green
The port is operating at 10 Gbps. The port LED fast flashes when the port
is sending or receiving data.
Steady yellow
The port is operating at 1 Gbps. The port LED fast flashes when the port is
sending or receiving data.
Flashing yellow (3 Hz)
POST has failed on the port.
Off
•
No link is present on the port.
•
The port mode LED operates in IRF mode.
•
The port mode LED operates in PoE mode (for PoE switches only.)
QSFP+ port LED
The S5130-30S-HI, S5130-54S-HI, and S5130-54QS-HI switches provide two 20G QSFP+ ports.
Each QSFP+ port has a QSFP+ port LED to indicate its operating state.
