65
Appendix B FRUs and compatibility
matrixes
FRUs and compatibility matrixes
FRUs
S5130-30S-HI
S5130-54S-HI
S5130-30C-HI
S5130-54C-HI
S5130-34C-HI
S5130-30F-HI
S5130-30C-PWR-HI
S5130-54C-PWR-HI
S5130-54QS-HI
Hot swappable power modules
PSR150-A1 N/A
Supported N/A
Supported
PSR150-D1 N/A
Supported N/A
Supported
PSR360-56A N/A
N/A
Supported
N/A
PSR720-56A N/A
N/A
Supported
N/A
PSR1110-56A N/A
N/A
Supported
N/A
Hot swappable fan trays
LSPM1FANSA N/A
Supported
Supported
Supported
LSPM1FANSB N/A
Supported
Supported
Supported
Expansion cards
LSWM2SP2PM N/A
Supported
Supported
N/A
LSWM2XGT2PM
N/A Supported
Supported N/A
LSPM6QP2PS N/A
Supported
Supported
N/A
LSPM6FWD N/A
Supported N/A
N/A
The PSR360-56A, PSR720-56A, PSR1110-56A, PSR150-A1, and PSR150-D1 power modules
support asset management. You can use the
display device manuinfo
command to view the
name, sequence number, and vendor of the power modules you have installed on the device.
You can install one power module, or two power modules for redundancy on the S5130-30C-HI,
S5130-34C-HI, S5130-30F-HI, S5130-54C-HI, and S5130-54QS-HI switches. These switches
support mix of an AC power module and a DC power module.
You can install one power module, or two power modules for redundancy on the
S5130-30C-PWR-HI and S5130-54C-PWR-HI switches. The PoE capabilities of these switches vary
by power module configuration. For more information, see
.
All S5130-HI switch models except the S5130-30S-HI and S5130-54S-HI switches support hot
swapping of fan trays. You must install two fan trays of the same model for the switch. Do not power
on the switch when it does not have any fan trays or has only one fan tray installed.
Support for the LSPM6QP2PS and LSPM6FWD cards varies by software version. For more
information, see the release notes for the switch.
