Command reference
Added and modified commands
Ethernet link aggregation
commands
Added commands:
•
display link-aggregation load-sharing mode
•
lacp period short
•
link-aggregation lacp traffic-redirect-notification enable
•
link-aggregation load-sharing mode
•
link-aggregation load-sharing mode local-first
Modified commands:
The
lacp port-priority
command is changed to
link-aggregation port-priority
.
Port isolation commands —
MSTP commands
Added commands:
•
bpdu-drop any
•
display stp bpdu-statistics
VLAN commands
Added commands:
•
MAC-based VLAN configuration commands
•
Protocol-based VLAN configuration commands
•
QoS priority configuration commands for voice packets
GVRP commands
—
QinQ commands
QinQ configuration commands are all newly added.
LLDP commands
—
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold
text represents commands and keywords that you enter literally as shown.
Italic
Italic
text represents arguments that you replace with actual values.
[ ]
Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you may select multiple choices or none.
&<1-n>
The argument or keyword and argument combination before the ampersand (&) sign can
be entered 1 to n times.
#
A line that starts with a pound (#) sign is comments.
