194
Parameters
all
: Advertises all the basic LLDP TLVs, all the IEEE 802.1 organizationally specific LLDP TLVs, or all the
IEEE 802.3 organizationally specific LLDP TLVs when the
all
keyword is specified for
basic-tlv
,
dot1-tlv
, or
dot3-tlv
, or advertises all the LLDP-MED TLVs except location identification TLVs when the
all
keyword is
specified for
med-tlv
.
basic-tlv
: Advertises basic LLDP TLVs.
port-description
: Advertises port description TLVs.
system-capability
: Advertises system capabilities TLVs.
system-description
: Advertises system description TLVs.
system-name
: Advertises system name TLVs.
dot1-tlv
: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id
: Advertises port VLAN ID TLVs.
protocol-vlan-id
: Advertises port and protocol VLAN ID TLVs.
vlan-name
: Advertises VLAN name TLVs.
vlan-id
: Specifies a VLAN ID in the TLVs to be advertised. The argument ranges from 1 to 4094 and
defaults to the least VLAN ID on the port.
dot3-tlv
: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation
: Advertises link aggregation TLVs.
mac-physic
: Advertises MAC/PHY configuration/status TLVs.
max-frame-size
: Advertises maximum frame size TLVs.
power
: Advertises power via MDI TLVs and power stateful control TLVs.
med-tlv
: Advertises LLDP-MED TLVs.
capability
: Advertises LLDP-MED capabilities TLVs.
inventory
: Advertises the following TLVs: hardware revision, firmware revision, software revision, serial
number, manufacturer name, model name, and asset ID.
location-id
: Advertises location identification TLVs.
civic-address
: Inserts the normal address information about the network device in location identification
TLVs .
device-type
: Sets a device type value, ranging from 0 to 2. Value 0 specifies a DHCP server. Value 1
specifies a switch. Value 2 specifies an LLDP-MED endpoint.
country-code
: Sets a country code, corresponding to ISO 3166.
{
ca-type ca-value
}&<1-10>: Configures address information, where
ca-type
represents the address
information type, ranging from 0 to 255,
ca-value
represents address information, a string of 1 to 250
characters, and &<1-10> indicates that you can enter up to ten such parameters.
elin-address
: Inserts telephone numbers for emergencies in location identification TLVs.
tel-number
: Sets the telephone number for emergencies, a string of 10 to 25 characters.
network-policy
: Advertises network policy TLVs.
power-over-ethernet
: Advertises extended power-via-MDI TLVs.
