102
View
Layer 2 Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use the
stp no-agreement-check
command to enable No Agreement Check on the port(s).
Use the
undo stp no-agreement-check
command to disable No Agreement Check on the port(s).
By default, No Agreement Check is disabled.
Configured in Layer 2 Ethernet interface view, the setting takes effect on the current interface only.
Configured in port group view, the setting takes effect on all member ports in the port group.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port leaves
the aggregation group.
This feature takes effect only after you enable it on the root port.
Examples
# Enable No Agreement Check on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] stp no-agreement-check
stp pathcost-standard
Syntax
stp
pathcost
-
standard
{
dot1d-1998
|
dot1t
|
legacy
}
undo
stp pathcost-standard
View
System view
Default level
2: System level
Parameters
dot1d-1998
: Configures the switch to calculate the default path cost for ports based on IEEE
802.1d-1998.
dot1t
: Configures the switch to calculate the default path cost for ports based on IEEE 802.1t.
legacy
: Configures the switch to calculate the default path cost for ports based on a private standard.
Description
Use the
stp pathcost-standard
command to specify a standard for the switch to use when calculating the
default path costs for ports of the switch.
