![H3C S5120-SI Series Operation Manual Download Page 661](http://html2.mh-extra.com/html/h3c/s5120-si-series/s5120-si-series_operation-manual_3711174661.webp)
1-12
Manually Collecting Topology Information
Refer to
Manually Collecting Topology Information
.
Enabling the Cluster Function
Refer to
Enabling the Cluster Function
.
Deleting a Member Device from a Cluster
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Delete a member device from
the cluster
undo administrator-address
Required
Configuring Access Between the Management Device and Its
Member Devices
After having successfully configured NDP, NTDP and cluster, you can configure, manage and monitor
the member devices through the management device. You can manage member devices in a cluster
through switching from the operation interface of the management device to that of a member device or
configure the management device by switching from the operation interface of a member device to that
of the management device.
Follow these steps to configure access between member devices of a cluster:
To do…
Use the command…
Remarks
Switch from the operation
interface of the management
device to that of a member
device
cluster switch-to
{
member-number
|
mac-address
mac-address
}
Required
Switch from the operation
interface of a member device to
that of the management device
cluster switch-to
administrator
Required
Telnet connection is used in the switching between the management device and a member device.
Note the following when switching between them:
z
Authentication is required when you switch from a member device to the management device. The
switching fails if authentication is not passed. Your user level is allocated according to the
predefined level by the management device if authentication is passed.
z
When a candidate device is added to a cluster and becomes a member device, its super password
with the level of 3 will be automatically synchronized to the management device. Therefore, after a
cluster is established, it is not recommended to modify the super password of any member
(including the management device and member devices) of the cluster; otherwise, the switching