2-12
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter the
default ISP
domain
view
domain
domain name
Specify the
AAA
scheme to
be applied
to the
domain
authentication default
{
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
Configure
the
authentica
tion mode
Quit to
system
view
quit
Optional
By default, the local AAA scheme is
applied. If you specify to apply the local
AAA scheme, you need to perform the
configuration concerning local user as
well.
If you specify to apply an existing scheme
by providing the
radius
-
scheme-name
argument, you need to perform the
following configuration as well:
z
Perform AAA-RADIUS configuration
on the switch. (Refer to
AAA
Configuration
for details.)
z
Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)
Create a local user
(Enter local user view.)
local-user
user-name
Required
No local user exists by default.
Set the authentication
password for the local
user
password
{
simple
|
cipher
}
password
Required
Specify the service type
for AUX users
service-type terminal
Required
Quit to system view
quit
—
Enter AUX user interface
view
user-interface aux
0
—
Configure to authenticate
users locally or remotely
authentication-mode
scheme
[
command-
authorization
]
Required
The specified AAA scheme determines
whether to authenticate users locally or
remotely.
Users are authenticated locally by default.
Set the
baud rate
speed
speed-value
Optional
The default baud rate of the AUX port
(also the Console port) is 9,600 bps.
Set the
check
mode
parity
{
even
|
mark
|
none
|
odd
|
space
}
Optional
By default, the check mode of a Console
port is set to
none
, that is, no check bit.
Set the
stop bits
stopbits
{
1
|
1.5
|
2
}
Optional
The default stop bits of a Console port is 1.
Configure
the Console
port
Set the
data bits
databits
{
5
|
6
|
7
|
8
}
Optional
The default data bits of a Console port is 8.
Configure the command
level available to users
logging in to the user
interface
user privilege level level
Optional
By default, commands of level 3 are
available to users logging in to the AUX
user interface.
