manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Manual, Page: 6 / 224

Share
Download
H3C S12500X-AF Series Configuration Manual Download Page 6

i 

Contents 

Configuring Ethernet interfaces ··························································· 1

 

Ethernet interface naming conventions ··························································································· 1

 

Configuring a management Ethernet interface ·················································································· 1

 

Configuring common Ethernet interface settings ··············································································· 1

 

Splitting a 40-GE interface and combining 10-GE breakout interfaces ············································· 2

 

Configuring basic settings of an Ethernet interface or subinterface ················································· 3

 

Configuring the link mode of an Ethernet interface ······································································ 4

 

Configuring jumbo frame support ···························································································· 4

 

Configuring physical state change suppression on an Ethernet interface ········································· 5

 

Configuring dampening on an Ethernet interface ········································································ 6

 

Enabling loopback testing on an Ethernet interface ····································································· 7

 

Configuring generic flow control on an Ethernet interface ····························································· 8

 

Configuring PFC on an Ethernet interface ················································································· 9

 

Setting the statistics polling interval ······················································································· 10

 

Configuring storm suppression ····························································································· 10

 

Configuring a Layer 2 Ethernet interface ······················································································· 11

 

Configuring storm control on an Ethernet interface ··································································· 11

 

Forcibly bringing up a fiber port ···························································································· 12

 

Configuring a Layer 3 Ethernet interface or subinterface··································································· 14

 

Setting the MTU for an Ethernet interface or subinterface ·························································· 14

 

Displaying and maintaining an Ethernet interface or subinterface ······················································· 14

 

Configuring loopback, null, and inloopback interfaces ···························· 16

 

Configuring a loopback interface ································································································· 16

 

Configuring a null interface ········································································································· 16

 

Configuring an inloopback interface ····························································································· 17

 

Displaying and maintaining loopback, null, and inloopback interfaces ·················································· 17

 

Bulk configuring interfaces ······························································· 18

 

Configuration restrictions and guidelines ······················································································· 18

 

Configuration procedure ············································································································ 18

 

Displaying and maintaining bulk interface configuration ···································································· 19

 

Configuring the MAC address table ···················································· 20

 

Overview ································································································································ 20

 

How a MAC address entry is created ····················································································· 20

 

Types of MAC address entries ····························································································· 20

 

MAC address table configuration task list ······················································································ 21

 

Configuring MAC address entries ································································································ 22

 

Configuration guidelines ····································································································· 22

 

Adding or modifying a static or dynamic MAC address entry globally ············································ 22

 

Adding or modifying a static or dynamic MAC address entry on an interface ·································· 22

 

Adding or modifying a blackhole MAC address entry ································································· 23

 

Adding or modifying a multiport unicast MAC address entry ························································ 23

 

Disabling MAC address learning ································································································· 24

 

Disabling global MAC address learning ·················································································· 24

 

Disabling MAC address learning on interfaces ········································································· 25

 

Setting the aging timer for dynamic MAC address entries ································································· 25

 

Enabling MAC address synchronization ························································································ 26

 

Configuring MAC address move notifications and suppression ·························································· 27

 

Enabling ARP fast update for MAC address moves ········································································· 28

 

Enabling MAC address learning at ingress ···················································································· 29

 

Configuring the base MAC address ······························································································ 29

 

Enabling SNMP notifications for the MAC address table ··································································· 30

 

Displaying and maintaining the MAC address table ········································································· 30

 

MAC address table configuration example ·····················································································  31

 

Network requirements ········································································································ 31

 

Summary of Contents for S12500X-AF Series

































































































































































































































Reviews:

No comments