143
Actions Access
Trunk
Hybrid
its VLAN ID is
different from the
PVID.
In the outbound
direction
Removes the VLAN tag
and sends the frame.
•
Removes the tag
and sends the frame
if the frame carries
the PVID tag and the
port belongs to the
PVID.
•
Sends
the frame
without removing the
tag if its VLAN is
carried on the port
but is different from
the PVID.
Sends the frame if its VLAN is
permitted on the port. The
tagging status of the frame
depends on the
port hybrid
vlan
command configuration.
Assigning an access port to a VLAN
You can assign an access port to a VLAN in VLAN view or interface view.
Make sure the VLAN has been created.
Assign one or multiple access ports to a VLAN in VLAN view
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VLAN view.
vlan
vlan-id
N/A
3.
Assign one or multiple
access ports to the VLAN.
port interface-list
By default, all ports belong to
VLAN 1.
Assign an access port to a VLAN in interface view
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
•
Enter Layer 2 Ethernet interface
view:
interface
interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
N/A
3.
Set the port link type to
access.
port link-type
access
By default, all ports are
access ports.
4.
(Optional.) Assign the
access port to a VLAN.
port access vlan vlan-id
By default, all access ports
belong to VLAN 1.
Assigning a trunk port to a VLAN
A trunk port supports multiple VLANs. You can assign it to a VLAN in interface view.
When you assign a trunk port to a VLAN, follow these restrictions and guidelines: