H3C S12500X-AF Series, Configuration Manual, Page: 155 / 224

144
•
To change the link type of a port from trunk to hybrid, set the link type to access first.
•
To enable a trunk port to transmit packets from its PVID, you must assign the trunk port to the
PVID by using the
port trunk permit vlan
command.
To assign a trunk port to one or multiple VLANs:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
•
Enter Layer 2 Ethernet interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface view:
interface bridge-aggregation
interface-number
N/A
3.
Set the port link type to
trunk.
port link-type trunk
By default, all ports are
access ports.
4.
Assign the trunk port to
the specified VLANs.
port trunk permit vlan
{
vlan-id-list
|
all
}
By default, a trunk port
permits only VLAN 1.
5.
(Optional.) Set the
PVID for the trunk port.
port trunk pvid vlan vlan-id
The default setting is VLAN
1.
Assigning a hybrid port to a VLAN
A hybrid port supports multiple VLANs. You can assign it to the specified VLANs in interface view.
Make sure the VLANs have been created.
When you assign a hybrid port to a VLAN, follow these restrictions and guidelines:
•
To change the link type of a port from trunk to hybrid, set the link type to access first.
•
To enable a hybrid port to transmit packets from its PVID, you must assign the hybrid port to the
PVID by using the
port hybrid vlan
command.
To assign a hybrid port to one or multiple VLANs:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
•
Enter Layer 2 Ethernet interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface view:
interface bridge-aggregation
interface-number
N/A
3.
Set the port link type to
hybrid.
port link-type hybrid
By default, all ports are
access ports.
4.
Assign the hybrid port
to the specified VLANs.
port hybrid vlan vlan-id-list
{
tagged
|
untagged
}
By default, the hybrid port is
an untagged member of the
VLAN to which the port
belongs when its link type is
access
.
5.
(Optional.) Set the
PVID for the hybrid
port.
port hybrid pvid vlan vlan-id
By default, the PVID of a
hybrid port is the ID of the
VLAN to which the port
belongs when its link type is
access
.