manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Examples, Page: 9 / 21

Share
Download
H3C S12500X-AF Series Configuration Examples Download Page 9

 

7 

[DeviceA] interface ten-gigabitethernet 1/3/0/7 

[DeviceA-Ten-GigabitEthernet1/3/0/7] port link-aggregation group 1023 

[DeviceA-Ten-GigabitEthernet1/3/0/7] quit 

[DeviceA] interface ten-gigabitethernet 2/3/0/7 

[DeviceA-Ten-GigabitEthernet2/3/0/7] port link-aggregation group 1023 

[DeviceA-Ten-GigabitEthernet2/3/0/7] quit 

# Create Bridge-Aggregation 1024. Assign the uplink ports that connect to Router B to 
Bridge-Aggregation 1024. 

[DeviceA] interface bridge-aggregation 1024 

[DeviceA-Bridge-Aggregation1024] quit 

[DeviceA] interface ten-gigabitethernet 1/3/0/8 

[DeviceA-Ten-GigabitEthernet1/3/0/8] port link-aggregation group 1024 

[DeviceA-Ten-GigabitEthernet1/3/0/8] quit 

[DeviceA] interface ten-gigabitethernet 2/3/0/8 

[DeviceA-Ten-GigabitEthernet2/3/0/8] port link-aggregation group 1024 

[DeviceA-Ten-GigabitEthernet2/3/0/8] quit 

2. 

Configure VLANs, ports, and IP addresses: 

# Create VLAN 10, assign an IP address to VLAN-interface 10, and assign Bridge-Aggregation 
1 to VLAN 10. 

[DeviceA]vlan 10 

[DeviceA-vlan10] quit 

[DeviceA] interface vlan-interface 10 

[DeviceA-Vlan-interface10] ip address 172.24.10.254 24 

[DeviceA-Vlan-interface10] quit 

[DeviceA] interface bridge-aggregation 1 

[DeviceA-Bridge-Aggregation1] port link-type trunk 

[DeviceA-Bridge-Aggregation1] undo port trunk permit vlan 1 

[DeviceA-Bridge-Aggregation1] port trunk permit vlan 10 

[DeviceA-Bridge-Aggregation1] quit 

# Create VLAN 20, assign an IP address to VLAN-interface 20, and assign Bridge-Aggregation 
2 to VLAN 20. 

[DeviceA] vlan 20 

[DeviceA-vlan20] quit 

[DeviceA] interface vlan-interface 20 

[DeviceA-Vlan-interface20] ip address 172.24.20.254 24 

[DeviceA-Vlan-interface20] quit 

[DeviceA] interface bridge-aggregation 2 

[DeviceA-Bridge-Aggregation2] port link-type trunk 

[DeviceA-Bridge-Aggregation2] undo port trunk permit vlan 1 

[DeviceA-Bridge-Aggregation2] port trunk permit vlan 20 

[DeviceA-Bridge-Aggregation2] quit 

# Create VLAN 40, assign an IP address to VLAN-interface 40, and assign Bridge-Aggregation 
1023 to VLAN 40. 

[DeviceA] vlan 40 

[DeviceA-vlan40] quit 

[DeviceA] interface vlan-interface 40 

[DeviceA-Vlan-interface40] ip address 172.24.40.254 24 

[DeviceA-Vlan-interface40] quit 

[DeviceA] interface bridge-aggregation 1023 

Summary of Contents for S12500X-AF Series






















Reviews:

No comments