manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Examples, Page: 12 / 21

Share
Download
H3C S12500X-AF Series Configuration Examples Download Page 12

 

10 

# Create Bridge-Aggregation 2. Assign the ports that connect to Router B to 
Bridge-Aggregation 2. 

[RouterA] interface bridge-aggregation 2 

[RouterA-Bridge-Aggregation2] quit 

[RouterA] interface ten-gigabitethernet 4/0/2 

[RouterA-Ten-GigabitEthernet4/0/2] port link-mode bridge 

[RouterA-Ten-GigabitEthernet4/0/2] port link-aggregation group 2 

[RouterA-Ten-GigabitEthernet4/0/2] quit 

[RouterA] interface ten-gigabitethernet 2/0/2 

[RouterA-Ten-GigabitEthernet2/0/2] port link-mode bridge 

[RouterA-Ten-GigabitEthernet2/0/2] port link-aggregation group 2 

[RouterA-Ten-GigabitEthernet2/0/2] quit 

2. 

Configure VLANs, ports, and IP addresses: 

# Create VLAN 40, assign an IP address to VLAN-interface 40, and assign Bridge-Aggregation 
1 to VLAN 40. 

[RouterA] vlan 40 

[RouterA-vlan40] quit 

[RouterA] interface vlan-interface 40 

[RouterA-vlan-interface40] ip address 172.24.40.2 24 

[RouterA-vlan-interface40] quit 

[RouterA] interface bridge-aggregation 1 

[RouterA-Bridge-Aggregation1] port access vlan 40 

[RouterA-Bridge-Aggregation1] quit 

# Create VLAN 30, assign an IP address to VLAN-interface 30, and assign Bridge-Aggregation 
2 to VLAN 30. 

[RouterA] vlan 30 

[RouterA-vlan30] quit 

[RouterA] interface vlan-interface 30 

[RouterA-vlan-interface30] ip address 172.24.2.2 24 

[RouterA-vlan-interface30] quit 

[RouterA] interface bridge-aggregation 2 

[RouterA-Bridge-Aggregation2] port link-type access 

[RouterA-Bridge-Aggregation2] port access vlan 30 

[RouterA-Bridge-Aggregation2] quit 

# Create VLAN 50, assign an IP address to VLAN-interface 50, and assign Ten-GigabitEthernet 
4/0/3 to VLAN 50. 

[RouterA] vlan 50 

[RouterA-vlan50] quit 

[RouterA] interface vlan-interface 50 

[RouterA-vlan-interface50] ip address 172.24.1.2 24 

[RouterA-vlan-interface50] quit 

[RouterA] interface ten-gigabitethernet 4/0/3 

[RouterA-Ten-GigabitEthernet4/0/3] port link-mode bridge 

[RouterA-Ten-GigabitEthernet4/0/3] port access vlan 50 

[RouterA-Ten-GigabitEthernet4/0/3] quit 

3. 

Configure OSPF between Router A and the IRF fabric. 

[RouterA] ospf 

[RouterA-ospf-1] import-route direct 

[RouterA-ospf-1] area 0 

Summary of Contents for S12500X-AF Series






















Reviews:

No comments