manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Examples, Page: 2 / 21

Share
Download
H3C S12500X-AF Series Configuration Examples Download Page 2

i 

Contents 

Introduction ····················································································· 1

 

Prerequisites ··················································································· 1

 

General restrictions and guidelines ······················································ 1

 

Hardware requirements ··············································································································· 1

 

Software requirements ················································································································ 2

 

Feature compatibility and configuration restrictions············································································ 2

 

IRF physical interface requirements ······························································································· 2

 

Connecting IRF ports ·················································································································· 2

 

Licensing requirements ··············································································································· 2

 

Example: Setting up an LACP MAD-enabled IRF fabric ···························· 3

 

Network configuration ················································································································· 3

 

Analysis ··································································································································· 4

 

Software versions used ··············································································································· 4

 

Restrictions and guidelines ·········································································································· 4

 

Procedures ······························································································································· 5

 

Setting up the IRF fabric ······································································································· 5

 

Configuring software features ································································································ 6

 

Verifying the configuration ·········································································································· 12

 

Verifying the IRF setup ······································································································· 12

 

Verifying the link backup function of multichassis aggregations ··················································· 13

 

Verifying the link backup function of IRF connections ································································ 13

 

Configuration files ···················································································································· 14

 

Related documentation ···································································· 19

 

 

Summary of Contents for S12500X-AF Series






















Reviews:

No comments