manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Examples, Page: 13 / 21

Share
Download
H3C S12500X-AF Series Configuration Examples Download Page 13

 

11 

[RouterA-ospf-1-area-0.0.0.0] network 172.24.40.0 0.0.0.255 

[RouterA-ospf-1-area-0.0.0.0] network 172.24.2.0 0.0.0.255 

[RouterA-ospf-1-area-0.0.0.0] quit 

[RouterA-ospf-1] quit 

Configuring Router B 

In this example, the egress router configuration only includes the connection to the IRF fabric. 

1. 

Configure link aggregations: 

# Create Bridge-Aggregation 1. Assign the downlink ports that connect to the IRF fabric to 
Bridge-Aggregation 1. 

<RouterB> system-view 

[RouterB] interface bridge-aggregation 1 

[RouterB-Bridge-Aggregation1] quit 

[RouterB] interface ten-gigabitethernet 4/0/1 

[RouterB-Ten-GigabitEthernet4/0/1] port link-mode bridge 

[RouterB-Ten-GigabitEthernet4/0/1] port link-aggregation group 1 

[RouterB-Ten-GigabitEthernet4/0/1] quit 

[RouterB] interface ten-gigabitethernet 2/0/1 

[RouterB-Ten-GigabitEthernet2/0/1] port link-mode bridge 

[RouterB-Ten-GigabitEthernet2/0/1] port link-aggregation group 1 

[RouterB-Ten-GigabitEthernet2/0/1] quit 

# Create Bridge-Aggregation 2. Assign the ports that connect to Router A to 
Bridge-Aggregation 2. 

[RouterB] interface bridge-aggregation 2 

[RouterB-Bridge-Aggregation2] quit 

[RouterB] interface ten-gigabitethernet 4/0/2 

[RouterB-Ten-GigabitEthernet4/0/2] port link-mode bridge 

[RouterB-Ten-GigabitEthernet4/0/2] port link-aggregation group 2 

[RouterB-Ten-GigabitEthernet4/0/2] quit 

[RouterB] interface ten-gigabitethernet 2/0/2 

[RouterB-Ten-GigabitEthernet2/0/2] port link-mode bridge 

[RouterB-Ten-GigabitEthernet2/0/2] port link-aggregation group 2 

[RouterB-Ten-GigabitEthernet2/0/2] quit 

2. 

Configure VLANs, ports, and IP addresses: 

# Create VLAN 41, assign an IP address to VLAN-interface 41, and assign Bridge-Aggregation 
1 to VLAN 41. 

[RouterB] vlan 41 

[RouterB-vlan41] quit 

[RouterB] interface vlan-interface 41 

[RouterB-vlan-interface41] ip address 172.24.41.3 24 

[RouterB-vlan-interface41] quit 

[RouterB] interface bridge-aggregation 1 

[RouterB-Bridge-Aggregation1] port access vlan 41 

[RouterB-Bridge-Aggregation1] quit 

# Create VLAN 30, assign an IP address to VLAN-interface 30, and assign Bridge-Aggregation 
2 to VLAN 30. 

[RouterB] vlan 30 

[RouterB-vlan30] quit 

[RouterB] interface vlan-interface 30 

Summary of Contents for S12500X-AF Series






















Reviews:

No comments