manualshive.com logo in svg

H3C S12500X-AF Series, Configuration Examples, Page: 11 / 21

Share
Download
H3C S12500X-AF Series Configuration Examples Download Page 11

 

9 

[SW1-GigabitEthernet3/0/1] port trunk permit vlan all 

[SW1-GigabitEthernet3/0/1] undo port trunk permit vlan 1 

[SW1-GigabitEthernet3/0/1] quit 

Configuring SW 2 

1. 

Configure a link aggregation: 

# Create Bridge-Aggregation 1. 

<SW2>system-view 

[SW2] interface bridge-aggregation 1 

[SW2-Bridge-Aggregation1] quit 

# Assign the uplink ports that connect to the IRF fabric to Bridge-Aggregation 1. 

[SW2] interface ten-gigabitethernet 4/0/1 

[SW2-Ten-GigabitEthernet4/0/1] port link-aggregation group 1 

[SW2-Ten-GigabitEthernet4/0/1] quit 

[SW2] interface ten-gigabitethernet 4/0/2 

[SW2-Ten-GigabitEthernet4/0/2] port link-aggregation group 1 

[SW2-Ten-GigabitEthernet4/0/2] quit 

2. 

Configure VLANs, ports, and IP addresses: 

# Create all VLANs. 

[SW2] vlan all 

# Configure VLAN settings on the uplink aggregate interface that connects to the IRF fabric. 

[SW2] interface bridge-aggregation 1 

[SW2-Bridge-Aggregation1] port link-type trunk 

[SW2-Bridge-Aggregation1] undo port trunk permit vlan 1 

[SW2-Bridge-Aggregation1] port trunk permit vlan 20 

[SW2-Bridge-Aggregation1] quit 

# Configure VLAN settings on the port that connects to Server Group 2. 

[SW2] interface gigabitethernet 3/0/1 

[SW2-GigabitEthernet3/0/1] port link-type trunk 

[SW2-GigabitEthernet3/0/1] port trunk permit vlan all 

[SW2-GigabitEthernet3/0/1] undo port trunk permit vlan 1 

[SW2-GigabitEthernet3/0/1] quit 

Configuring Router A 

In this example, the egress router configuration only includes the connection to the IRF fabric. 

1. 

Configure link aggregations: 

# Create Bridge-Aggregation 1. Assign the downlink ports that connect to the IRF fabric to 
Bridge-Aggregation 1. 

<RouterA> system-view 

[RouterA] interface bridge-aggregation 1 

[RouterA-Bridge-Aggregation1] quit 

[RouterA] interface ten-gigabitethernet 4/0/1 

[RouterA-Ten-GigabitEthernet4/0/1] port link-mode bridge 

[RouterA-Ten-GigabitEthernet4/0/1] port link-aggregation group 1 

[RouterA-Ten-GigabitEthernet4/0/1] quit 

[RouterA] interface ten-gigabitethernet 2/0/1 

[RouterA-Ten-GigabitEthernet2/0/1] port link-mode bridge 

[RouterA-Ten-GigabitEthernet2/0/1] port link-aggregation group 1 

[RouterA-Ten-GigabitEthernet2/0/1] quit 

Summary of Contents for S12500X-AF Series






















Reviews:

No comments