10
auto-close
time
By default, the automatic link teardown time is 0 seconds, which indicates that no automatic
link teardown will be performed.
Configure the automatic link establishment time.
auto-link
time
By default, the automatic link establishment time is 0 seconds, which indicates that no
automatic link establishment will be performed.
Configure the TCP connection idle timeout time.
idle-timeout seconds
By default, the TCP connection idle timeout time is 0 seconds, which indicates that the
connection never times out.
5.
(Optional.) Bind a VPN instance to the template.
bind vpn-instance vpn-instance-name
By default, the template is not bound with any VPN instance.
This command is used when the RTC client is also acting as an MPLS PE router. This feature
enables the RTC client to receive terminal access packets from multiple VPNs and initiate
connection requests.
6.
(Optional.) Configuring the terminal buffer.
Configure the router not to clear the terminal buffer after a TCP connection is established.
driverbuf
save
By default, the router clears the terminal receive buffer after a TCP connection is
established.
Configure the terminal receive buffer size.
driverbuf
size
size
By default, the terminal receive buffer size is 8 KB.
Configure the maximum size of data sent to a terminal at one time.
sendbuf bufsize
size
By default, the maximum size of data sent to a terminal at one time is 500 bytes.
Configure the terminal send buffer threshold.
sendbuf threshold value
By default, no terminal send buffer threshold is configured.
7.
(Optional.) Configure the terminal hotkey
Optional.) Set the terminal reset hotkey.
resetkey ascii-code
&<1-3>
By default, no terminal reset hotkey is configured.
Configure the VTY switching hotkey.
vty
vty-number
hotkey
ascii-code
&<1-3>
By default, no VTY switching hotkey is configured.
The ASCII value of the hotkey must be different from the ASCII value of any other hotkey
configured on the device. In addition, using the hotkey may not get a fast response when the
terminal display is busy.
8.
(Optional.) Configure TCP parameters.
tcp
{
recvbuf-size
recvsize
|
sendbuf-size
sendsize
|
nodelay
|
keepalive
time count
}
By default:
The receive buffer size is 2048 bytes.
