106
Views
System view
Default command level
2: System level
Parameters
interface-number
: Specifies a Layer 2 aggregate interface by its number in the range of 1 to 1024.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware Command
compatibility
MSR800 Yes
MSR 900
No
MSR900-E Yes
MSR 930
Yes
MSR 20-1X
No
MSR 20
No
MSR 30
Yes
MSR 50
Yes
MSR 2600
Yes
MSR3600-51F Yes
When you create a Layer 2 aggregate interface, a Layer 2 aggregation group with the same number
is automatically created. If you remove the Layer 2 aggregate interface, you also remove the Layer 2
aggregation group, and any member ports will leave the aggregation group.
Examples
# Create Layer 2 aggregate interface Bridge-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]
interface route-aggregation
Use
interface route-aggregation
to create a Layer 3 aggregate interface or subinterface and enter
the Layer 3 aggregate interface or subinterface view.
Use
undo
interface route-aggregation
to remove a Layer 3 aggregate interface or subinterface.
Syntax
interface route-aggregation
{
interface-number
|
interface-number.subnumber
}
undo interface route-aggregation
{
interface-number
|
interface-number.subnumber
}
Views
System view
Default command level
2: System level
