31
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged
Please wait... Done.
Configuring Ethernet1/1... Done.
Configuring Ethernet1/2... Done.
Configuring Ethernet1/3... Done.
The output shows that Ethernet 1/1, Ethernet 1/2, and Ethernet 1/3 are the member ports of the
aggregation group corresponding to Bridge-Aggregation 1.
Related commands
port link-type
port link-type
Use
port link-type
to configure the link type of a port.
Use
undo port link-type
to restore the default link type of a port.
Syntax
port link-type
{
access
|
hybrid
|
trunk
}
undo port link-type
Default
Any port is an access port.
Views
Ethernet interface view, Layer 2 aggregate interface view
Default command level
2: System level
Parameters
access
: Configures the link type of a port as access.
hybrid
: Configures the link type of a port as hybrid.
trunk
: Configures the link type of a port as trunk.
Usage guidelines
The following matrix shows the command and hardware compatibility in Layer 2 aggregate interface
view:
Hardware Command
compatibility
MSR800 Yes
MSR 900
No
MSR900-E Yes
MSR 930
Yes
MSR 20-1X
No
MSR 20
No
MSR 30
Yes
