H3C H3C S5100-SI, Operation Manual, Page: 697 / 830

2-1
2
Basic System Configuration and Debugging
When configuring basic system configuration and debugging, go to these sections for information you
are interested in:
z
Basic System Configuration
z
Displaying the System Status
z
Debugging the System
Basic System Configuration
Perform the following basic system configuration:
To do… Use the command… Remarks
Set the current date and
time of the system
clock datetime HH:MM:SS
{ YYYY/MM/DD |
MM/DD/YYYY }
Required
Execute this command in user view.
The default value is 23:55:00
04/01/2000 when the system starts up.
Set the local time zone
clock timezone zone-name
{ add | minus } HH:MM:SS
Optional
Execute this command in user view.
By default, it is the UTC time zone.
Set the name and time
range of the summer
time
clock summer-time
zone_name { one-off |
repeating } start-time
start-date end-time end-date
offset-time
Optional
Execute this command in user view.
z
When the system reaches the
specified start time, it automatically
adds the specified offset to the
current time, so as to toggle the
system time to the summer time.
z
When the system reaches the
specified end time, it automatically
subtracts the specified offset from the
current time, so as to toggle the
summer time to normal system time.
Enter system view from
user view
system-view —
Set the system name of
the switch
sysname sysname
Optional
By default, the name is H3C.
Return from current view
to lower level view
quit
Optional
If the current view is user view, you will
quit the current user interface.
Return from current view
to user view
return
Optional
The composite key <Ctrl+Z> has the
same effect with the
return command.