H3C H3C S5100-SI, Operation Manual, Page: 53 / 830

5-5
Table 5-3 CLI views
View Available operation Prompt example Enter method Quit method
User view
Display operation
status and statistical
information of the
switch
<Sysname>
Enter user view
once logging into
the switch.
Execute the
quit command
to log out of the
switch.
System view
Configure system
parameters
[Sysname]
Execute the
system-view
command in user
view.
Execute the
quit or return
command to
return to user
view.
Ethernet port
view Configure Ethernet
port parameters
1000 Mbps
Ethernet port
view:
[Sysname-Gigabi
tEthernet1/0/1]
Execute the
interface
gigabitethernet
command in
system view.
Aux1/0/0 port
(the console
port) view
The S5100-SI/EI
series do not support
configuration on port
Aux1/0/0
[Sysname-Aux1/
0/0]
Execute the
interface aux 1/0/0
command in
system view
VLAN view
Configure VLAN
parameters
[Sysname-vlan1]
Execute the vlan
command in
system view.
VLAN
interface view
Configure VLAN
interface parameters,
including the
management VLAN
parameters
[Sysname-Vlan-i
nterface1]
Execute the
interface
Vlan-interface
command in
system view.
Loopback
interface view Configure loopback
interface parameters [Sysname-LoopB
ack0]
Execute the
interface
loopback
command in
system view.
NULL
interface view Configure NULL
interface parameters [Sysname-NULL
0]
Execute the
interface null
command in
system view.
Local user
view Configure local user
parameters [Sysname-luser-u
ser1]
Execute the
local-user
command in
system view.
User
interface view Configure user
interface parameters [Sysname-ui-aux
0]
Execute the
user-interface
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
FTP client
view Configure FTP client
parameters
[ftp]
Execute the ftp
command in user
view.
Execute the
quit command
to return to user
view.