H3C H3C S5100-SI, Operation Manual, Page: 422 / 830

1-33
To do… Use the command… Remarks
Enter system view system-view —
Configure traffic
redirecting
traffic-redirect vlan vlan-id inbound
acl-rule interface interface-type
interface-number
Required
3) Configuring traffic redirecting for a port group
Follow these steps to configure traffic redirecting for the incoming packets in a port group:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter port group view port-group group-id —
Configure traffic
redirecting
traffic-redirect inbound acl-rule
interface interface-type
interface-number Required
4) Configuring traffic redirecting for a port
Follow these steps to configure traffic redirecting for the incoming packets on a port:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure traffic
redirecting
traffic-redirect inbound acl-rule
interface interface-type
interface-number Required
If traffic is redirected to a Combo port in down state, the system automatically redirects the
traffic to the common port in up state corresponding to this Combo port. Refer to the Basic
Port Configuration module of this manual for information about Combo ports.
User-defined traffic classification rules for traffic redirecting in the global scope or for a
VLAN take precedence over the default rules used for processing protocol packets. The
device will execute traffic redirecting preferentially, which may affect device management
implemented through Telnet and so on.