
1-7
z
The content of a modified or created rule cannot be identical with the content of any existing rules;
otherwise the rule modification or creation will fail, and the system prompts that the rule already
exists.
z
If the ACL is created with the
auto
keyword specified, the newly created rules will be inserted in the
existent ones by depth-first principle, but the numbers of the existent rules are unaltered.
Configuration Example
# Configure ACL 3000 to permit the TCP packets sourced from the network 129.9.0.0/16 and destined
for the network 202.38.160.0/24 and with the destination port number being 80.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0
0.0.0.255 destination-port eq 80
# Display the configuration information of ACL 3000.
[Sysname-acl-adv-3000] display acl 3000
Advanced ACL 3000, 1 rule
Acl's step is 1
rule 0 permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0 0.0.0.255
destination-port eq www
Configuring Layer 2 ACL
Layer 2 ACLs filter packets according to their Layer 2 information, such as the source and destination
MAC addresses, VLAN priority, and Layer 2 protocol types.
A Layer 2 ACL can be numbered from 4000 to 4999.
Configuration Prerequisites
z
To configure a time range-based Layer 2 ACL rule, you need to create the corresponding time
ranges first. For information about time range configuration, refer to section
Configuring Time
Range
z
The settings to be specified in the rule, such as source and destination MAC addresses, VLAN
priorities, and Layer 2 protocol types, are determined.
Configuration Procedure
Table 1-4
Define a Layer 2 ACL rule
Operation
Command
Description
Enter system view
system-view
—
Create a Layer 2 ACL
and enter layer 2 ACL
view
acl number
acl-number
Required
Define an ACL rule
rule
[
rule-id
] {
permit
|
deny
}
rule-string
Required
For information about
rule-string
,
refer to
ACL Commands
.
Assign a description
string to the ACL rule
rule
rule-id
comment
text
Optional
No description by default
Summary of Contents for H3C S5100-SI
