Operation Manual – Stack-Cluster
H3C S3100 Series Ethernet Switches
Chapter 2 Cluster
2-26
Note:
z
After completing the above configuration, you can execute the
cluster switch-to
{
member-number
|
mac-address
H-H-H
} command on the management device to
switch to member device view to maintain and manage a member device. After that,
you can execute the
cluster switch-to
administrator
command to return to
management device view.
z
In addition, you can execute the
reboot member
{
member-number
|
mac-address
H-H-H
}
[
eraseflash
] command on the management device to reboot a member
device. For detailed information about these operations, refer to the preceding
description in this chapter.
z
After the above configuration, you can receive logs and SNMP trap messages of all
cluster members on the NMS.
2.4.2 Enhanced Cluster Feature Configuration Example
I. Network requirements
z
The cluster operates properly.
z
Add the device with the MAC address 0001-2034-a0e5 to the cluster blacklist, that
is, prevent the device from being managed and maintained by the cluster.
z
Save the current cluster topology as the base topology and save it in the flash of
the local management device in the cluster.
