manualshive.com logo in svg

H3C AR 18-3XE/18-21X Series, Installation Manual

Share
Download
H3C AR 18-3XE/18-21X Series Installation Manual Download Page 67

Installation Manual 
H3C AR 18-3XE/18-21X Series Routers 

Chapter 3  Starting and
 Maintaining the Router

 

3-19 

3.2.3  Backing Up and Restoring the Extended 
Segment of the Boot Rom Program 

I. Backing up the extended segment of the Boot Rom 

program to the Flash 

Follow these steps to back up the extended segment of the Boot 

Rom: 

1) 

Enter the Boot Menu, and then press <8> to enter the Boot 

Rom operation sub-menu. 

2)  Enter <4> in the sub-menu to copy the current extended 

segment of the Boot Rom program to the Flash.  

If the backup attempt is successful, the following message 

appears: 

  Writing to FLASH.Please wait...#### 

  Backuping Boot Rom program to FLASH successed! 

3)  When the sub-menu re-appears, press <5> to exit and 

reboot the router.  

II. Restoring the extended segment of the Boot Rom 

program from the Flash 

If faults occur to the extended segment of the Boot Rom or you 

upgrade it mistakenly, you can restore the extended segment of the 

Boot Rom from the Flash to the Boot Rom by taking these steps: 

1) 

Enter the Boot Menu, and then press <8> to enter the Boot 

Rom operation sub-menu. 

2) 

Enter <3> in the operation sub-menu to restore the extended 

segment of the Boot Rom from the Flash. 

Summary of Contents for AR 18-3XE/18-21X Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands