manualshive.com logo in svg

H3C AR 18-3XE/18-21X Series, Installation Manual

Share
Download
H3C AR 18-3XE/18-21X Series Installation Manual Download Page 61

Installation Manual 
H3C AR 18-3XE/18-21X Series Routers 

Chapter 3  Starting and
 Maintaining the Router

 

3-13 

7) 

Enter the debugging environment. 

 

  Caution: 

Upgrade the entire Boot Rom program only when necessary and 

under the guide of an engineer. When doing this, make sure that the 

Boot Rom software version can work with the version of the adopted 

application program. 

 

8) 

Enter the Boot Rom operation submenu.  

The Boot Rom submenu is displayed: 

Boot Rom Download Menu: 

     1:  Download Boot Rom with XModem 

          2:  Download Extended Segment of Boot Rom with XModem 

     3:  Restore Extended Segment of Boot Rom from FLASH 

     4:  Backup Extended Segment of Boot Rom to FLASH 

     5:  Exit to Main Menu 

     Enter your choice(1-5): 

The menu provides approaches to Boot Rom upgrade, backup, 

and recovery. See sections 3.2.2  “Upgrading Programs through 

XModem” and 3.2.3  “Backing Up and Restoring the Extended 

Segment of the Boot Rom Program” for the procedures. 

Summary of Contents for AR 18-3XE/18-21X Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands