manualshive.com logo in svg

H3C AR 18-3XE/18-21X Series, Installation Manual

Share
Download
H3C AR 18-3XE/18-21X Series Installation Manual Download Page 62

Installation Manual 
H3C AR 18-3XE/18-21X Series Routers 

Chapter 3  Starting and
 Maintaining the Router

 

3-14 

9)  Ignore the software version of the extended Boot Rom 

program segment for backward compatibility. If you fail to 

upgrade software because the system considers that you 

are using an “invalid version” even when the correct version 

is used, you can use this option to ignore version check. This 

is a one-time operation, however; the router checks version 

again at reboot. 

10)  Exit and reboot. 

3.2.2  Upgrading Programs through XModem 

When you upgrade software through XModem, you can use the 

console port without having to set up another configuration 

environment. 

I. Upgrading an application program 

Follow these steps to upgrade an application program: 

1)  Enter the Boot menu and press <1> to download an 

application program using XModem. The following 

download speeds are available: 

Downloading application program from serial ... 

Please choose your download speed: 

1: 9600 bps 

2: 19200 bps 

3: 38400 bps 

4: 57600 bps 

5: 115200 bps 

6: Exit and reboot 

Enter your choice(1-6): 

Summary of Contents for AR 18-3XE/18-21X Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands