H.E.R.O. INDUSTRIES
1150GSD MANUAL - “B” VERSION
6
tightened the siphon hose will no longer swivel or move, as such, ensure the siphon hose is positioned in
the desired direction prior to making the final tightening. The desired position is straight back from the
intake. Use caution to avoid over tightening which may result in cracked or broken fittings.
3.
Attach prime hose (ref# 51) to
prime valve (ref# 36) hose barb
(ref#50). Secure with clamp (ref# 52).
4. Attach paint hose to outgo tee
(ref# 35).
5. Attach gun to paint hose.
NOTE
;
Spray tip and tip guard
should be attached to gun prior to
attaching to hose.
6. P l a c e
i n t a k e
s i p h o n
a s s e m b l y
into a
clean 5 gallon pail.
7. Install strainer bag (accessory item 5GAL SB) in pail and secure
with large rubber band (accessory item 106).
NOTE
;
Strainer bag must remain 4 inches from the bottom of pail
8. Trigger gun to release any pressure in the unit. Use extreme caution
to ensure that the gun is not directed towards anyone or any object
which may be damaged.
NOTE
;
Unit may contain storage solution.
9. To remove storage solution, add one gallon of thinner, compatible
with the type of paint to be used, to the siphon pail.
51
50
52
Paint
Hose
35
Strainer bag and si-
phon tube.
ALWAYS
strain paint before
starting
7
8
11
36
